Custom Nobl TR33 wheels, handbuilt in Colorado, with your choice of hubs from Chris King, DT Swiss, Hope, Industry Nine, Onyx, Project 321, Shimano or White Industries.
The one rim that does it all. Whether it's a gnarly enduro stage, or an all day epic the TR33 has your back. It's strength is it's adaptability. Equally at home on a light short travel marathon XC bike or a mid travel enduro rig, the TR33 is ready.
The new TR33 takes everything Nobl has learned in the past 7 years and improves on it. A revised profile, a tweaked layup and improved resin system make this our strongest TR33 yet. With improvements in impact strength and scratch resistance, the TR33 continues to be the benchmark for a versatile do it all rim.
Whether it’s a super light 2.2″ XC tire or a reinforced 2.6″ Enduro tire, the TR33 is comfortable with both. There is good reason why the TR33 has become Nobl's most popular rim. There is very little it can’t handle. With a ‘just right’ amount of compliance, the TR33 tracks rough and technical terrain with poise and confidence.
- 390g (27.5″)
- 405g (29″)
- ERD: 555mm (27.5″)
- ERD: 593mm (29″)
- 32h or 28h
NOBL rims are produced to a high standard using Toray T700 carbon fiber. They use a hookless design which is lower and rounder than most rims which provides more impact protection and increased resistance to flatting. A curved bead seat helps set up your tires tubeless and makes them harder to burp. Typically a floor pump is all that is needed to seat the tires.
Profile tweaks in conjunction with thicker sidewalls result in the strongest TR33 yet. The 24mm deep profile retains some compliance while retaining the precise and controlled feeling that carbon fiber rims offer. 2.5mm reinforced lips offer plenty of tire bead support while being resistant to impacts.
The new resin system and manufacturing process results in a ‘raw’ finish that produces a higher level of scratch resistance. Thanks to less heating cycles and no clearcoat, refinishing, or other chemicals being used post-production, the rims are now produced in a more environmentally friendly way.